ELGEN Manufacturing
300 Murray Hill Parkway
East Rutherford, NJ 07073
300 Murray Hill Parkway
East Rutherford, NJ 07073
- HOME
- PRODUCTS
- FLEXIBLE DUCT CONNECTOR
- TDC & TDF CORNERS
- 4-BOLT CONNECTIONS
- CLEATS & FLANGE CORNERS
- VANE & RAIL
- OPPOSED & PARALLEL BLADE DAMPER HARDWARE
- QUADRANTS AND BEARINGS
- ENGINEERED END BEARINGS
- STANDOFFS
- HEAVY DUTY DOOR HANDLES
- ACCESS DOORS
- SNAP PIPE AND FITTINGS
- SCISSOR CLIPS AND CORNER CLIPS
- CONDUIT INSERTS & INSULATION FASTENERS
- WIRE MESH AND SCREWS
- INSULATED FLEX AND FLEX TIES
- ANCHORS, DRILL BITS, AND STRUT
- STRAP HANGERS AND SLIP & DRIVE
- BEAM CLAMPS, ROD, STAPLES, BLADES AND RIVETS
- GENIE LIFTS, VERMETTE LIFTS, LADDERS AND GANG BOXES
- TOOLS
- SHRINK WRAP W/PSA
- ELGEN-TO-DURODYNE CROSS-REFERENCE
- 4-BOLT CONNECTION SPECIFICATION
- CONTACT US
- FAQ
CLEATS & FLANGE CORNERS
E-55 Cleat
The E-55 Cleat is in stock in 22 Gauge and 20 Gauge. The E-55 Cleat snaps into place and won't pop off. Also, the 'Teeth' eliminate rattling.
J-Cleat & Elgen Flange Cleat
The J-Cleat & Elgen Flange Cleat are manufactured out of 20 Gauge and used for the 4-Bolt Connections.
Punched Angle
Sizes – 1-½”x 1-½” & 2”x2”
Gauges – 16GA & 14GA
E-55 Cleat
J-Cleat
Elgen Flange Cleat
Elgen Flange Corner
J Corner
Universal-Cleat
Punched Angle