ELGEN Manufacturing
300 Murray Hill Parkway
East Rutherford, NJ 07073
300 Murray Hill Parkway
East Rutherford, NJ 07073
- HOME
- PRODUCTS
- FLEXIBLE DUCT CONNECTOR
- TDC & TDF CORNERS
- 4-BOLT CONNECTIONS
- CLEATS & FLANGE CORNERS
- VANE & RAIL
- OPPOSED & PARALLEL BLADE DAMPER HARDWARE
- QUADRANTS AND BEARINGS
- ENGINEERED END BEARINGS
- STANDOFFS
- HEAVY DUTY DOOR HANDLES
- ACCESS DOORS
- SNAP PIPE AND FITTINGS
- SCISSOR CLIPS AND CORNER CLIPS
- CONDUIT INSERTS & INSULATION FASTENERS
- WIRE MESH AND SCREWS
- INSULATED FLEX AND FLEX TIES
- ANCHORS, DRILL BITS, AND STRUT
- STRAP HANGERS AND SLIP & DRIVE
- BEAM CLAMPS, ROD, STAPLES, BLADES AND RIVETS
- GENIE LIFTS, VERMETTE LIFTS, LADDERS AND GANG BOXES
- TOOLS
- SHRINK WRAP W/PSA
- ELGEN-TO-DURODYNE CROSS-REFERENCE
- 4-BOLT CONNECTION SPECIFICATION
- CONTACT US
- FAQ
CONDUIT INSERTS & INSULATION FASTENERS
CONDUIT INSERTS
| STOCK SIZES |
|---|
| 1/2” Conduit Insert Steel (1,000pack) |
| 1/2” Conduit Insert Steel (100pack) |
| 3/4” Conduit Insert Steel (1,000pack) |
| 3/4” Conduit Insert Steel (100pack) |
| 1/2” Conduit Insert St/St#316 |
| 3/4” Conduit Insert St/St#316 |
| Magnetic Installation Tool |
**Pull tested to over 1900 pounds.
WELD PINS
| STOCK SIZES |
|---|
| 1/2” Elgen Platinum Weld Pin |
| 3/4” Elgen Platinum Weld Pin (for 1” 1.5# Liner) |
| 1” Elgen Platinum Weld Pin (for 1” 3# Liner) |
| 1-1/8” Elgen Platinum Weld Pin (for 1-1/2” Liner all densities) |
| 1-1/2” Elgen Platinum Weld Pin (for 2” 1.5# & 2# Liner) |
BANG-ON GRIPNAILS
| STOCK SIZES |
|---|
| #050 Gripnail |
| #100 Gripnail |
| #110 Gripnail |
| #120 Gripnail |
| #130 Gripnail |
| #150 Gripnail |
PEEL-&-PRESS HANGERS
| STOCK SIZES |
|---|
| SAH 3/4” Steel |
| SAH 1-1/4” Steel |
| SAH 1-5/8” Steel |
| SAH 2-1/2” Steel |
| SAH 4-1/2” Steel |
| SAH 1-5/8” Alum. |
| SAH 2-1/2” Alum. |
Conduit Cross Lamp - Is equipped to accommodate both ½” & ¾” conduit.
