ELGEN Manufacturing
300 Murray Hill Parkway
East Rutherford, NJ 07073
300 Murray Hill Parkway
East Rutherford, NJ 07073
- HOME
- PRODUCTS
- FLEXIBLE DUCT CONNECTOR
- TDC & TDF CORNERS
- 4-BOLT CONNECTIONS
- CLEATS & FLANGE CORNERS
- VANE & RAIL
- OPPOSED & PARALLEL BLADE DAMPER HARDWARE
- QUADRANTS AND BEARINGS
- ENGINEERED END BEARINGS
- STANDOFFS
- HEAVY DUTY DOOR HANDLES
- ACCESS DOORS
- SNAP PIPE AND FITTINGS
- SCISSOR CLIPS AND CORNER CLIPS
- CONDUIT INSERTS & INSULATION FASTENERS
- WIRE MESH AND SCREWS
- INSULATED FLEX AND FLEX TIES
- ANCHORS, DRILL BITS, AND STRUT
- STRAP HANGERS AND SLIP & DRIVE
- BEAM CLAMPS, ROD, STAPLES, BLADES AND RIVETS
- GENIE LIFTS, VERMETTE LIFTS, LADDERS AND GANG BOXES
- TOOLS
- SHRINK WRAP W/PSA
- ELGEN-TO-DURODYNE CROSS-REFERENCE
- 4-BOLT CONNECTION SPECIFICATION
- CONTACT US
- FAQ
SPEEDY DAMPER REGULATOR SET
| NUMBER | QUANTITY | DESCRIPTION |
|---|---|---|
| ESR-1 | 100 | (1) THREADED BEARING - 2-1/2” OVERALL (1) RP-6 - 1/4” RETRACTABLE BEARING (1) HANDLE (2) WASHERS (1) WING NUT |
ESR-1
FOR INSULATED DUCT
| NUMBER | QUANTITY | DESCRIPTION |
|---|---|---|
| ESR-1XL | 100 | (1) LONG THREADED BEARING - 4” OVERALL (1) RP-6XL - 1/4” LONG RETRACTABLE BEARING (1) HANDLE (2) WASHERS (1) WING NUT |
“DIAL” DAMPER REGULATOR SETS
¼” REGULATOR SETS – FOR DAMPERS UP TO 10”
| NUMBER | QUANTITY | DESCRIPTION |
|---|---|---|
| EDR-2X | 100 | (1) RP-2X REGULATOR – SQUARE HOLE (1) RP-6 RETRACTABLE BEARING (1) RP-8 SQUARE BEARING |
| EDR-2XL | 100 | (1) RP-2X REGULATOR – SQUARE HOLE (1) RP-6XL LONG RETRACTABLE BEARING (1) RP-8XL LONG SQUARE BEARING |
| EDR-2XL-SS STAINLESS STEEL |
100 | (1) RP-2X-SS REGULATOR – SQUARE HOLE (1) RP-6XL-SS LONG RETRACTABLE BEARING (1) RP-8XL-SS LONG SQUARE BEARING |
3/8” REGULATOR SETS – FOR DAMPERS UP TO 20”
| NUMBER | QUANTITY | DESCRIPTION |
|---|---|---|
| EDR-3 | 100 | (1) RP-3 REGULATOR (1) RP-7 RETRACTABLE BEARING (1) RP-9 SQUARE BEARING |
| EDR-3XL | 100 | (1) RP-3 REGULATOR (1) RP-7XL LONG RETRACTABLE BEARING (1) RP-9XL LONG SQUARE BEARING |
| EDR-3XL-SS STAINLESS STEEL |
100 | (1) RP-3-SS REGULATOR (1) RP-7XL-SS LONG RETRACTABLE BEARING (1) RP-9XL-SS LONG SQUARE BEARING |
BEARINGS
| NUMBER | QTY | SIZE | DESCRIPTION |
|---|---|---|---|
| RP-1 | 100 | 1/4” | ‘SPEEDY” ASSEMBLED BEARING- HANDLE, BEARING, NUT |
| RP-6 | 100 | 1/4” | STANDARD RETRACTABLE BEARING |
| RP-7 | 100 | 3/8” | STANDARD RETRACTABLE BEARING |
| RP-6XL | 100 | 1/4” | LONG RETRACTABLE BEARING |
| RP-7XL | 100 | 3/8” | LONG RETRACTABLE BEARING |
| RP-8XL | 100 | 1/4” | LONG SQUARE BEARING |
| RP-9XL | 100 | 3/8” | LONG SQUARE BEARING |
| RP-8X | 100 | 1/4” | SQUARE BEARING - STANDARD |
| RP-9 | 100 | 3/8” | SQUARE BEARING - STANDARD |
| RP-8XXL | 100 | 1/4” | SQUARE BEARING - EXTRA LONG |
| RP-9XXL | 100 | 3/8” | SQUARE BEARING - EXTRA LONG |
| RP-10 | 100 | 1/2” | ROUND BEARING – HEAVY DUTY |
| RP-11 | 100 | 1/2” | SQUARE BEARING – HEAVY DUTY |
HAMMER ON REGULATOR SETS
| SET CONTENTS | ||||||
|---|---|---|---|---|---|---|
| NUMBER | QTY | E-702 | E-704 | E-705 | E-706 | E-708 |
| E-69 | 144 | 1 | 1 | 1 | 1 | |
| E-70 | 144 | 1 | 1 | 1 | 2 | |
| E-71 | 144 | 1 | 1 | 1 | 1 | 1 |
DAMPER REGULATOR PARTS
| NUMBER | QUANTITY | DESCRIPTION |
|---|---|---|
| E-702 | 100 | TIP |
| E-704 | 100 | WASHER |
| E-705 | 100 | HANDLE |
| E-706 | 100 | WING NUT |
| E-708 | 100 | BEARING |
E-702, E-704, E-705, E-706, E-708 (left - right)
QUADRANT DAMPER REULATORY SETS
3/8” STANDARD SETS
| NUMBER | QUANTITY | DESCRIPTION |
|---|---|---|
| EQR-4 | 100 | (1) RP-4 STAMPED HANDLE- QUADRANT REGULATOR(1) RP-7 RETRACTABLE BEARING(1) RP-9 SQUARE BEARING |
| EQR-4C | 100 | (1) RP-4C DIE CAST HANDLE REGULATOR SET SCREWS & LOCK WASHER (1) RP-7 RETRACTABLE BEARING(1) RP-9 SQUARE BEARING |
| NUMBER | QUANTITY | DESCRIPTION |
|---|---|---|
| EQR-4L | 100 | (1) RP-4 STAMPED HANDLE- QUADRANT REGULATOR (1) RP-7XL LONG RETRACTABLE BEARING(1) RP-9XL LONG SQUARE BEARING |
| EQR-4CL | 100 | (1) RP-4C DIE CAST HANDLE REGULATOR SET SCREWS & LOCK WASHER (1) RP-7XL LONG RETRACTABLE BEARING(1) RP-9XL LONG SQUARE BEARING |
1/2” STANDARD SETS
| NUMBER | QUANTITY | DESCRIPTION |
|---|---|---|
| EQR-5 | 100 | (1) RP-5 STAMPED HANDLE- QUADRANT REGULATOR (1) RP-10 HEAVY DUTY ROUND BEARING(1) RP-11HEAVY DUTY SQUARE BEARING |
| EQR-5C | 100 | (1) RP-5C DIE CAST HANDLE- QUADRANT REGULATOR (1) RP-10 HEAVY DUTY ROUND BEARING(1) RP-11HEAVY DUTY SQUARE BEARING |
| EQR-5CR | 100 | (1) RP-5CR DIE CAST HANDLE – ROUND HOLE QUAD REGULATOR(1) RP-10 HEAVY DUTY ROUND BEARING(1) RP-11HEAVY DUTY SQUARE BEARING |
3/8” QUADRANT REGULATOR DIE CAST HANDLE-SQUARE HOLE
| NUMBER | QUANTITY | DESCRIPTION |
|---|---|---|
| RP-4C | 100 | 3/8” PLATED STEEL ASSEMBLED REGULATOR WITH SET SCREWS AND LOCK WASHER |
| RP-4C-SS | 100 | ST/ST REGULATOR, SET SCREW, WASHER & DIE CAST HANDLE |
1/2” QUADRANT REGULATOR STAMPED HANDLE
| NUMBER | QUANTITY | DESCRIPTION |
|---|---|---|
| RP-5 | 100 | 1/2” QUADRANT REGULATOR WITH SQUARE HOLE |
1/2” QUADRANT REGULATOR DIE CAST HANDLE- SQUARE HOLE
| NUMBER | QUANTITY | DESCRIPTION |
|---|---|---|
| RP-5C | 100 | 1/2” PLATED STEEL ASSEMBLED REGULATOR WITH SET SCREWS AND LOCK WASHER |
| RP-5C-SS | 100 | ST/ST REGULATOR, SET SCREW, WASHER & DIE CAST HANDLE |
QUADRANT REGULATOR DIE CAST HANDLE-ROUND HOLE FOR ROUND ROD
| NUMBER | QUANTITY | DESCRIPTION |
|---|---|---|
| RP-5CR | 100 | 1/2” PLATED STEEL ASSEMBLED REGULATOR WITH SET SCREWS AND LOCK WASHER |
| RP-5CR-SS | 100 | ST/ST REGULATOR, SET SCREW, WASHER & DIE CAST HANDLE |
DIAL & QUADRANT REGULATORS
1/4” DIAL REGULATOR
| NUMBER | QUANTITY | DESCRIPTION |
|---|---|---|
| RP-2X | 100 | 1/4” REGULATOR WITH SQUARE HOLE |
3/8” DIAL REGULATOR
| NUMBER | QUANTITY | DESCRIPTION |
|---|---|---|
| RP-3 | 100 | 3/8” DIAL REGULATOR WITH SQUARE HOLE |
3/8” QUADRANT REGULATOR STAMPED HANDLE
| NUMBER | QUANTITY | DESCRIPTION |
|---|---|---|
| RP-4 | 100 | 3/8” QUADRANT REGULATOR WITH SQUARE HOLE |
RP-2X, RP-3, RP-4 (left - right)
NYLON SNAP-IN BUSHINGS
Holes Sizes Available:
1/4” Round, 1/4” Square, 3/8” Round, 3/8” Square, AND 1/2” Round.
EDR-3
RP-7, RP-7XL, RP-9, RP-9XL (top - bottom)
EQR-4
EQR-4C
RP-5, RP-5C, RP-5CR (top - bottom)
RP-4C
Nylon Snap-In Bushings
3/8" Damper Clip